| Problem | Likely Cause | Solution (from manual) | | :--- | :--- | :--- | | Console won’t turn on | Dead batteries or loose wire | Replace AAA batteries. Check that the sensor wire is fully inserted into the console. | | Erratic or zero readings | Magnet sensor gap is too wide | Adjust the position of the reed switch (magnetic sensor) so it passes within 1-2mm of the magnet on the flywheel. | | Pedaling feels jerky | Flywheel imbalance or loose belt | Contact customer service. Do not open the main belt housing yourself. | | Squeaking noise during use | Loose bolts or lack of lubrication on pedal threads | Tighten all visible bolts with the included Allen key. Apply a drop of light oil to pedal threads. | | Resistance knob does nothing | Magnetic unit is stuck or cable is disconnected | Open the tension cable housing (see manual diagram 7) and ensure the cable is attached to the magnet arm. |
The computer console on the BC 5700 is your dashboard. While specific buttons may vary slightly depending on the production year, the core functions are standard across most Body Sculpture models: Body Sculpture Bc 5700 Magnetic Bike Manual