Key Programming With Delphi Ds150e -

| Function | Supported? | Notes | |----------|------------|-------| | Read number of programmed keys | ✅ Yes | On most cars | | Erase lost keys | ✅ Yes | Removes all keys from IMMO memory | | Program new transponder | ✅ Yes | Requires PIN/security code | | Program remote controls | ✅ Yes | Separate procedure in body computer | | EEPROM reading (via OBD) | ❌ No | Not supported; needs separate programmer | | Generate dealer key | ❌ No | Cannot make a virgin transponder from scratch | | PIN code extraction | ⚠️ Sometimes | Only on specific older cars (e.g., Fiat, Lancia) |

This usually happens if the ignition isn't in the correct position or if your DS150E firmware is outdated. key programming with delphi ds150e

: Open the software and select the correct make, model, and year. Navigate to the Immobilizer system in the menu. Establish Connection | Function | Supported

While the exact steps vary by vehicle, the general procedure with a DS150E involves: Navigate to the Immobilizer system in the menu

Note: This is a general guide. Always connect a battery charger to the vehicle to prevent voltage drop during programming.