| Wire Color | Function | Typical Connection | | :--- | :--- | :--- | | | Memory / Constant 12V | Connect to car battery positive (always on) | | Red | Accessory / Switched 12V | Connect to ignition switch (turns on/off with car) | | Black | Ground (Chassis) | Connect to bare metal chassis of the car | | Blue / White | Amp Remote Turn-on | Connect to external amplifiers or power antenna | | Orange / White | Illumination | Connects to car’s dash light dimmer circuit | | Gray | Front Right (+) | Front Right Speaker Positive | | Gray / Black | Front Right (-) | Front Right Speaker Negative | | White | Front Left (+) | Front Left Speaker Positive | | White / Black | Front Left (-) | Front Left Speaker Negative | | Purple | Rear Right (+) | Rear Right Speaker Positive | | Purple / Black | Rear Right (-) | Rear Right Speaker Negative | | Green | Rear Left (+) | Rear Left Speaker Positive | | Green / Black | Rear Left (-) | Rear Left Speaker Negative |
The Pioneer QXE1047 Go to product viewer dialog for this item. pioneer qxe1047 manual
; it is "ready-to-use" as soon as batteries—usually AAA or a CR2025/CR2032 cell—are inserted. Functional Design and Safety Beyond convenience, the is a tool for driver safety | Wire Color | Function | Typical Connection
. Rather than being locked to a single device, it functions as a standard control interface for dozens of models across the DEH, FH, and MVH series. This makes it a versatile survivor in the world of car audio, often outlasting the specific head units it was originally packaged with. Diverse Compatibility : It supports everything from the entry-level to more advanced units like the DEH-X3800UI Operational Simplicity : As an infrared (IR) device, it typically requires no programming Rather than being locked to a single device,
Because it is an infrared remote, it typically does not require a standalone "manual" for setup—it works immediately upon inserting a battery if the receiver is compatible. Amazon.com 🛠️ Quick Setup & Use : Uses one 3V lithium battery. : No programming or pairing codes are required. Troubleshooting